Fluorescein PEG aldehyde Cat. No. PG2-ALFC-5k 5000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Fluorescein PEG aldehyde

Cat. No. PG2-ALFC-5k
Specification 5000 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Fluorescein PEG Aldehyde, FITC-PEG-CHO

Fluorescein PEG Aldehde (FITC-PEG-CHO) is one of Nanocs’ reactive fluorescent PEG dyes that can react with N-terminal amines. Fluorescein is a bright green fluorescent dye with excitation/emission wavelength at 495 nm/515 nm. Aldehyde group is reactive toward amines, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with N-terminal amine groups at acidic pH, a condition sometimes required for certain bioconjugation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of fuorescein dyes to desired position on targeted molecules. Conjugated FITC dye can be easily detected by common fluorescent instruments under FITC channel. PEG linker between FITC and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used fluorescent dyes, Nanocs pegylated fluorescent dyes are more stable and easier to use.

Physical Properties:

  • Appearance: Orange/yellow solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reactive group: Aldehyde (-CHO);
  • Reactive toward: N-terminal amines, primary amine, aminooxy, hydrazide, etc.;
  • Ex/Em wavelength: 495 nm/515 nm;

Storage Conditions:

  • Store at -20 0C. Protect from light.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Fluorescein PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • FITC PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted moleculess in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add FITC PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Fluorescein PEG aldehyde Cat. No. PG2-ALFC-3k 3400 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Fluorescein PEG aldehyde

Cat. No. PG2-ALFC-3k
Specification 3400 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Fluorescein PEG Aldehyde, FITC-PEG-CHO

Fluorescein PEG Aldehde (FITC-PEG-CHO) is one of Nanocs’ reactive fluorescent PEG dyes that can react with N-terminal amines. Fluorescein is a bright green fluorescent dye with excitation/emission wavelength at 495 nm/515 nm. Aldehyde group is reactive toward amines, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with N-terminal amine groups at acidic pH, a condition sometimes required for certain bioconjugation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of fuorescein dyes to desired position on targeted molecules. Conjugated FITC dye can be easily detected by common fluorescent instruments under FITC channel. PEG linker between FITC and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used fluorescent dyes, Nanocs pegylated fluorescent dyes are more stable and easier to use.

Physical Properties:

  • Appearance: Orange/yellow solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reactive group: Aldehyde (-CHO);
  • Reactive toward: N-terminal amines, primary amine, aminooxy, hydrazide, etc.;
  • Ex/Em wavelength: 495 nm/515 nm;

Storage Conditions:

  • Store at -20 0C. Protect from light.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Fluorescein PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • FITC PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted moleculess in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add FITC PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Fluorescein PEG aldehyde Cat. No. PG2-ALFC-2k 2000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Fluorescein PEG aldehyde

Cat. No. PG2-ALFC-2k
Specification 2000 Da
Unit Size 10 mg
Price $425.00

Qty Add to Cart

Fluorescein PEG Aldehyde, FITC-PEG-CHO

Fluorescein PEG Aldehde (FITC-PEG-CHO) is one of Nanocs’ reactive fluorescent PEG dyes that can react with N-terminal amines. Fluorescein is a bright green fluorescent dye with excitation/emission wavelength at 495 nm/515 nm. Aldehyde group is reactive toward amines, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with N-terminal amine groups at acidic pH, a condition sometimes required for certain bioconjugation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of fuorescein dyes to desired position on targeted molecules. Conjugated FITC dye can be easily detected by common fluorescent instruments under FITC channel. PEG linker between FITC and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used fluorescent dyes, Nanocs pegylated fluorescent dyes are more stable and easier to use.

Physical Properties:

  • Appearance: Orange/yellow solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reactive group: Aldehyde (-CHO);
  • Reactive toward: N-terminal amines, primary amine, aminooxy, hydrazide, etc.;
  • Ex/Em wavelength: 495 nm/515 nm;

Storage Conditions:

  • Store at -20 0C. Protect from light.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Fluorescein PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • FITC PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted moleculess in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add FITC PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Biotin PEG aldehyde Cat. No. PG2-ALBN-5k 5000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Biotin PEG aldehyde

Cat. No. PG2-ALBN-5k
Specification 5000 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Biotin PEG Aldehyde

Biotin PEG Aldehde (Biotin-PEG-CHO) is one of Nanocs’ chemical reactive biotin PEG derivatives that can label N-terminal amines. Aldehyde group is reactive toward amine, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with protonated amines at acidic environment (pH ~4), a condition sometimes required for certain site-specific biotinylation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of biotin tag to desired position on targeted molecules. Resulted biotin can recognize and bind to avidin, streptavidin or neutravidin with high affinity. PEG linker between Biotin and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used biotinylation reagents, Nanocs pegylated biotins are water soluble, more stable and easier to use.

Physical Properties:

  • Appearance: White/off-whilte solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reacive group: Aldehyde (-CHO);
  • Reactive to: N-terminal amine, primary amine, etc.;
  • Functional moiety: D-biotin;
  • Reactive toward: avidin, streptavidin or neutravidin;

Storage Conditions:

  • Store at -20 0C. Desiccate.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Biotin PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Reaction buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • Biotin PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve ready labeling molecules in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add Biotin PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Biotin PEG aldehyde, Aldehyde PEG Biotin Cat. No. PG2-ALBN-3k 3400 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Biotin PEG aldehyde, Aldehyde PEG Biotin

Cat. No. PG2-ALBN-3k
Specification 3400 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Biotin PEG Aldehyde

Biotin PEG Aldehde (Biotin-PEG-CHO) is one of Nanocs’ chemical reactive biotin PEG derivatives that can label N-terminal amines. Aldehyde group is reactive toward amine, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with protonated amines at acidic environment (pH ~4), a condition sometimes required for certain site-specific biotinylation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of biotin tag to desired position on targeted molecules. Resulted biotin can recognize and bind to avidin, streptavidin or neutravidin with high affinity. PEG linker between Biotin and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used biotinylation reagents, Nanocs pegylated biotins are water soluble, more stable and easier to use.

Physical Properties:

  • Appearance: White/off-whilte solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reacive group: Aldehyde (-CHO);
  • Reactive to: N-terminal amine, primary amine, etc.;
  • Functional moiety: D-biotin;
  • Reactive toward: avidin, streptavidin or neutravidin;

Storage Conditions:

  • Store at -20 0C. Desiccate.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Biotin PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Reaction buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • Biotin PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve ready labeling molecules in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add Biotin PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Biotin PEG aldehyde, Aldehyde PEG Biotin Cat. No. PG2-ALBN-2k 2000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Biotin PEG aldehyde, Aldehyde PEG Biotin

Cat. No. PG2-ALBN-2k
Specification 2000 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Biotin PEG Aldehyde

Biotin PEG Aldehde (Biotin-PEG-CHO) is one of Nanocs’ chemical reactive biotin PEG derivatives that can label N-terminal amines. Aldehyde group is reactive toward amine, hydrazide or oxyamine groups from pH 5-9. Unlike amine reactive succinimidyl ester group (NHS), aldehyde can react with protonated amines at acidic environment (pH ~4), a condition sometimes required for certain site-specific biotinylation reactions. Aldehyde reacts with amine group to form an intermediate Schiff bond. Further reduction with hydride will form a stable C-N bond. Reaction between aldhyde and other groups allows site-specific conjugation and labeling of biotin tag to desired position on targeted molecules. Resulted biotin can recognize and bind to avidin, streptavidin or neutravidin with high affinity. PEG linker between Biotin and aldehyde offers higher water solubility, less steric hindrance and enhanced stability. Compared to other commonly used biotinylation reagents, Nanocs pegylated biotins are water soluble, more stable and easier to use.

Physical Properties:

  • Appearance: White/off-whilte solid;
  • Solubility: Soluble in water, DMSO, DMF;
  • Reacive group: Aldehyde (-CHO);
  • Reactive to: N-terminal amine, primary amine, etc.;
  • Functional moiety: D-biotin;
  • Reactive toward: avidin, streptavidin or neutravidin;

Storage Conditions:

  • Store at -20 0C. Desiccate.

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Biotin PEG aldehyde over the amount of amine-containing molecules (such as protein or antibody) results in sufficient conjugation.

Materials Required:

  • Reaction buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • Biotin PEG aldehyde stock solution: 5-10 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve ready labeling molecules in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add Biotin PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Maleimide PEG aldehyde Cat. No. PG2-ALML-5k 5000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Maleimide PEG aldehyde

Cat. No. PG2-ALML-5k
Specification 5000 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Description:

Maleimide PEG aldehyde is one of Nanocs premier thiol (-SH) and N-terminal amine group pegylation reagents. Maleimide group reacts with sulfhydryl (thiol) group at pH 6.5-7.5 rapidly and specifically while aldehyde group reacts with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. Pegylated maleimide and aldehydes are water soluble and all reactions can be carried out in aqueous buffer. Aldehyde reacts with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • White/off-white solid;
  • Soluble in warm water, DMSO, DMF;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Maleimide PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine and thiol free aqueous buffer, pH 5.0~6.5.
  • Maleimide PEG aldehyde stock solution: 20 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add maleimide PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Maleimide PEG aldehyde Cat. No. PG2-ALML-3k 3400 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Maleimide PEG aldehyde

Cat. No. PG2-ALML-3k
Specification 3400 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Description:

Maleimide PEG aldehyde is one of Nanocs premier thiol (-SH) and N-terminal amine group pegylation reagents. Maleimide group reacts with sulfhydryl (thiol) group at pH 6.5-7.5 rapidly and specifically while aldehyde group reacts with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. Pegylated maleimide and aldehydes are water soluble and all reactions can be carried out in aqueous buffer. Aldehyde reacts with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • White/off-white solid;
  • Soluble in warm water, DMSO, DMF;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Maleimide PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine and thiol free aqueous buffer, pH 5.0~6.5.
  • Maleimide PEG aldehyde stock solution: 20 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add maleimide PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

Maleimide PEG aldehyde Cat. No. PG2-ALML-2k 2000 Da 10 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

Maleimide PEG aldehyde

Cat. No. PG2-ALML-2k
Specification 2000 Da
Unit Size 10 mg
Price $385.00

Qty Add to Cart

Description:

Maleimide PEG aldehyde is one of Nanocs premier thiol (-SH) and N-terminal amine group pegylation reagents. Maleimide group reacts with sulfhydryl (thiol) group at pH 6.5-7.5 rapidly and specifically while aldehyde group reacts with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. Pegylated maleimide and aldehydes are water soluble and all reactions can be carried out in aqueous buffer. Aldehyde reacts with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • White/off-white solid;
  • Soluble in warm water, DMSO, DMF;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of Maleimide PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine and thiol free aqueous buffer, pH 5.0~6.5.
  • Maleimide PEG aldehyde stock solution: 20 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add maleimide PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG amide acetaldehyde Cat. No. PG1-ALA-5k 5000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG amide acetaldehyde

Cat. No. PG1-ALA-5k mPEG amide acetaldehyde           Cat. No. PG1-ALA-5k     5000 Da    250 mg
Specification 5000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG amide acetaldehyde is a site specific Pegylation reagent with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG amide acetaldehyde Cat. No. PG1-ALA-2k 2000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG amide acetaldehyde

Cat. No. PG1-ALA-2k mPEG amide acetaldehyde           Cat. No. PG1-ALA-2k     2000 Da    250 mg
Specification 2000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG amide acetaldehyde is a site specific Pegylation reagent with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG amide acetaldehyde Cat. No. PG1-ALA-10k 10000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG amide acetaldehyde

Cat. No. PG1-ALA-10k mPEG amide acetaldehyde           Cat. No. PG1-ALA-10k     10000 Da    250 mg
Specification 10000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG amide acetaldehyde is a site specific Pegylation reagent with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG amide acetaldehyde Cat. No. PG1-ALA-20k 20000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG amide acetaldehyde

Cat. No. PG1-ALA-20k mPEG amide acetaldehyde           Cat. No. PG1-ALA-20k     20000 Da    250 mg
Specification 20000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG amide acetaldehyde is a site specific Pegylation reagent with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG propionaldehyde Cat. No. PG1-ALP-5k 5000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG propionaldehyde

Cat. No. PG1-ALP-5k mPEG propionaldehyde           Cat. No. PG1-ALP-5k     5000 Da    250 mg
Specification 5000 Da
Unit Size 250 mg
Price $325.00

Qty Add to Cart

Methoxy PEG propionaldehyde is a stable aldehyde PEG that can be used for protein, antibody, peptides or carbohydrate N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG propionaldehyde Cat. No. PG1-ALP-2k 2000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG propionaldehyde

Cat. No. PG1-ALP-2k mPEG propionaldehyde           Cat. No. PG1-ALP-2k     2000 Da    250 mg
Specification 2000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Methoxy PEG propionaldehyde is a stable aldehyde PEG that can be used for protein, antibody, peptides or carbohydrate N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG propionaldehyde Cat. No. PG1-ALP-10k 10000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG propionaldehyde

Cat. No. PG1-ALP-10k mPEG propionaldehyde           Cat. No. PG1-ALP-10k     10000 Da    250 mg
Specification 10000 Da
Unit Size 250 mg
Price $425.00

Qty Add to Cart

Methoxy PEG propionaldehyde is a stable aldehyde PEG that can be used for protein, antibody, peptides or carbohydrate N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG propionaldehyde Cat. No. PG1-ALP-20k 20000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG propionaldehyde

Cat. No. PG1-ALP-20k mPEG propionaldehyde           Cat. No. PG1-ALP-20k     20000 Da    250 mg
Specification 20000 Da
Unit Size 250 mg
Price $485.00

Qty Add to Cart

Methoxy PEG propionaldehyde is a stable aldehyde PEG that can be used for protein, antibody, peptides or carbohydrate N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG benzaldehyde Cat. No. PG1-BAL-5k 5000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG benzaldehyde

Cat. No. PG1-BAL-5k mPEG benzaldehyde           Cat. No. PG1-BAL-5k     5000 Da    250 mg
Specification 5000 Da
Unit Size 250 mg
Price $325.00

Qty Add to Cart

Description:

mPEG benzaldehyde is a monofunctional, site specific PEG derivative with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups. Aromatic aldehyde PEG shows better stability in aqueous solution.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG benzaldehyde Cat. No. PG1-BAL-2k 2000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG benzaldehyde

Cat. No. PG1-BAL-2k mPEG benzaldehyde           Cat. No. PG1-BAL-2k     2000 Da    250 mg
Specification 2000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG benzaldehyde is a monofunctional, site specific PEG derivative with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups. Aromatic aldehyde PEG shows better stability in aqueous solution.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet

mPEG benzaldehyde Cat. No. PG1-BAL-10k 10000 Da 250 mg修饰性聚乙二醇

上海金畔生物科技有限公司提供各种分子量和基团修饰性聚乙二醇定制服务。

mPEG benzaldehyde

Cat. No. PG1-BAL-10k mPEG benzaldehyde           Cat. No. PG1-BAL-10k     10000 Da    250 mg
Specification 10000 Da
Unit Size 250 mg
Price $385.00

Qty Add to Cart

Description:

mPEG benzaldehyde is a monofunctional, site specific PEG derivative with amine reactive aldehyde group. Aldeyde PEG is a common N-terminal amine group pegylation reagent. The reaction between aldehyde group with the α-amine at the N-terminus produces an intermediate Schiff base. Further reduction with hydride will form a stable C-N bond. PEG aldehydes react with n-terminus amine groups at a pH of from 5.0 to 9.5. Higher pH will result in multiple Pegylation with both terminal and lysine groups. Aromatic aldehyde PEG shows better stability in aqueous solution.

Physical Properties:

  • Off-white/white solid;
  • Soluble in water, DMSO, DMF;
  • Activity >90%; Peroxide<10ppm;

Storage Conditions:

  • Store at -20 0C

Reaction Procedures:

Generally, a 5- to 10-fold molar excess of PEG aldehyde over the amount of amine-containing material results in sufficient conjugation.

Materials Required:

  • Pegylation buffer: Amine-free aqueous buffer, pH 5.0~6.5.
  • PEG aldehyde stock solution: 50 mg in 1 mL conjugation buffer.
  • Washing solution: Distilled water or any aqueous buffer.

Reaction Steps:

Dissolve targeted materials in pegylation buffer. Estimate the concentration of primary amine groups on the targeted materials. Add PEG aldehyde stock solution to the targeted conjugation materials with the final concentration keep at least 10 mg/mL. Allow mixture agitates at room temperature for 2~4 hrs at room temperature or overnight 4 0C. After reaction, C=N bond can be reduced by sodium borohydride. Conjugate can be purified either by size exclusion chromatography or dialysis.

Documents
  • SDS
  • DataSheet