ITO Coated Glass Slides, 25x75x0.55 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x0.55 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 75x75x0.55 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated Coverslips, 18×18 mm

ITO (Inidum Tin Oxide) Coated Coverslips

ITO (Indium Tin Oxide) coated coverslips provided from Nanocs were made by coating ITO to one side of glass coveslips. These ITO coated glass coverslips come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness around 0.15~0.17mm. ITO coverslips has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated glass coverslips have excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated coverslips is over 85% in the visible range.

Nanocs ITO Coated Coverslip Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Coverslip thickness: 0.15~0.17 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO coverslip size: 18 mm x 18 mm, 22 mm x 22 mm, 22 mm x 40 mm

ITO Coated PET Film, 25×75 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated PET Plastic Film

ITO (Indium Tin Oxide) and FTO coated PET plastic film provided from Nanocs were made by coating ITO or FTO to one side of PET film. These ITO coated plastic film comes with different surface resistivity from 30 ohm/sq to 100 ohm/sq, with thickness around 0.17 mm. ITO coated PET film has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated PET has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated plastic film is over 85% in the visible range.

Nanocs ITO Coated PET Film Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• PET plastic thickness: 0.17~0.22 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO PET size: 1 cm to 10 cm, customer size available upon request.

ITO Coated PET Film, 25×75 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated PET Plastic Film

ITO (Indium Tin Oxide) and FTO coated PET plastic film provided from Nanocs were made by coating ITO or FTO to one side of PET film. These ITO coated plastic film comes with different surface resistivity from 30 ohm/sq to 100 ohm/sq, with thickness around 0.17 mm. ITO coated PET film has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated PET has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated plastic film is over 85% in the visible range.

Nanocs ITO Coated PET Film Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• PET plastic thickness: 0.17~0.22 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO PET size: 1 cm to 10 cm, customer size available upon request.

ITO Coated PET Film, 25×75 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated PET Plastic Film

ITO (Indium Tin Oxide) and FTO coated PET plastic film provided from Nanocs were made by coating ITO or FTO to one side of PET film. These ITO coated plastic film comes with different surface resistivity from 30 ohm/sq to 100 ohm/sq, with thickness around 0.17 mm. ITO coated PET film has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated PET has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated plastic film is over 85% in the visible range.

Nanocs ITO Coated PET Film Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• PET plastic thickness: 0.17~0.22 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO PET size: 1 cm to 10 cm, customer size available upon request.

ITO Coated PET Film, 25×75 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated PET Plastic Film

ITO (Indium Tin Oxide) and FTO coated PET plastic film provided from Nanocs were made by coating ITO or FTO to one side of PET film. These ITO coated plastic film comes with different surface resistivity from 30 ohm/sq to 100 ohm/sq, with thickness around 0.17 mm. ITO coated PET film has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated PET has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated plastic film is over 85% in the visible range.

Nanocs ITO Coated PET Film Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• PET plastic thickness: 0.17~0.22 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO PET size: 1 cm to 10 cm, customer size available upon request.