Maleimide-PEG45-NH2

Description:

Nanocs SnapLink^TM pegylated succinimidyl cyclohexane Maleimide (SMCC) amine is a heterobifunctional crosslinker that can react with sulfhydryl and amien reactive groups, such as NHS ester. This crosslinker contains a sulfhydryl reactive maleimide group and a primary amine group bridged with PEG arm. The hydrophilic polyethylene glycol (PEG) spacer arm imparts water solubility that is transferred to the crosslinked molecules , thus reducing aggregation of labeled proteins in solution. The PEG spacer arm also gives the cyclohexane maleimide PEG amine a long and flexible structure to minimize steric hindrance for its reaction to other molecues. Compared to other maleimide NHS ester, SMCC has higher stability in aqueous solution because of its cyclohexane bridge. Maleimide group reacts with available thiol or sulfhydryl at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid or semi-solid;
• Reactivity: Reactive to sulfhydryl and carboxylic groups;
• Soluble in DMF or DMSO;

Storage Conditions:

• Store at -20 ⁰C, desiccate. Avoid frequent thaw and freeze.

SMCC-PEG4-NH2

Description:

Nanocs SnapLink^TM pegylated succinimidyl cyclohexane Maleimide (SMCC) amine is a heterobifunctional crosslinker that can react with sulfhydryl and amine reactive groups, such as NHS ester. This crosslinker contains a sulfhydryl reactive maleimide group and a primary amine group bridged with PEG arm. The hydrophilic polyethylene glycol (PEG) spacer arm imparts water solubility that is transferred to the crosslinked molecules , thus reducing aggregation of labeled proteins in solution. The PEG spacer arm also gives the cyclohexane maleimide PEG amine a long and flexible structure to minimize steric hindrance for its reaction to other molecues. Compared to other maleimide NHS ester, SMCC has higher stability in aqueous solution because of its cyclohexane bridge. Maleimide group reacts with available thiol or sulfhydryl at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid or semi-solid;
• Reactivity: Reactive to thiols and activitated carboxylic groups.
• Soluble in DMF or DMSO;

Storage Conditions:

• Store at -20 ⁰C, desiccate. Avoid frequent thaw and freeze.

SMCC-PEG12-NH2

Description:

Nanocs SnapLink^TM pegylated succinimidyl cyclohexane Maleimide (SMCC) amine is a heterobifunctional crosslinker that can react with sulfhydryl and amine reactive groups, such as NHS ester. This crosslinker contains a sulfhydryl reactive maleimide group and a primary amine group bridged with PEG arm. The hydrophilic polyethylene glycol (PEG) spacer arm imparts water solubility that is transferred to the crosslinked molecules , thus reducing aggregation of labeled proteins in solution. The PEG spacer arm also gives the cyclohexane maleimide PEG amine a long and flexible structure to minimize steric hindrance for its reaction to other molecues. Compared to other maleimide NHS ester, SMCC has higher stability in aqueous solution because of its cyclohexane bridge. Maleimide group reacts with available thiol or sulfhydryl at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid or semi-solid;
• Reactivity: Reactive to thiols and activitated carboxylic groups.
• Soluble in DMF or DMSO;

Storage Conditions:

• Store at -20 ⁰C, desiccate. Avoid frequent thaw and freeze.

SMCC-PEG23-NH2

Description:

Nanocs SnapLink^TM pegylated succinimidyl cyclohexane Maleimide (SMCC) amine is a heterobifunctional crosslinker that can react with sulfhydryl and amine reactive groups, such as NHS ester. This crosslinker contains a sulfhydryl reactive maleimide group and a primary amine group bridged with PEG arm. The hydrophilic polyethylene glycol (PEG) spacer arm imparts water solubility that is transferred to the crosslinked molecules , thus reducing aggregation of labeled proteins in solution. The PEG spacer arm also gives the cyclohexane maleimide PEG amine a long and flexible structure to minimize steric hindrance for its reaction to other molecues. Compared to other maleimide NHS ester, SMCC has higher stability in aqueous solution because of its cyclohexane bridge. Maleimide group reacts with available thiol or sulfhydryl at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid or semi-solid;
• Reactivity: Reactive to thiols and activitated carboxylic groups.
• Soluble in DMF or DMSO;

Storage Conditions:

• Store at -20 ⁰C, desiccate. Avoid frequent thaw and freeze.

SMCC-PEG45-NH2

Description:

Nanocs SnapLink^TM pegylated succinimidyl cyclohexane Maleimide (SMCC) amine is a heterobifunctional crosslinker that can react with sulfhydryl and amine reactive groups, such as NHS ester. This crosslinker contains a sulfhydryl reactive maleimide group and a primary amine group bridged with PEG arm. The hydrophilic polyethylene glycol (PEG) spacer arm imparts water solubility that is transferred to the crosslinked molecules , thus reducing aggregation of labeled proteins in solution. The PEG spacer arm also gives the cyclohexane maleimide PEG amine a long and flexible structure to minimize steric hindrance for its reaction to other molecues. Compared to other maleimide NHS ester, SMCC has higher stability in aqueous solution because of its cyclohexane bridge. Maleimide group reacts with available thiol or sulfhydryl at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid or semi-solid;
• Reactivity: Reactive to thiols and activitated carboxylic groups.
• Soluble in DMF or DMSO;

Storage Conditions:

• Store at -20 ⁰C, desiccate. Avoid frequent thaw and freeze.

Maleimidopropionic hydrazide

Description:

Nanocs SnapLink maleimide hydrazide is a heterobifunctional crosslinker. This crosslinker contains a hydrazide group that can be reacted with carbohydrate. The maleimide group reacts with sulfhydryl groups at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid;
• Purity: >95%

Storage Conditions:

• Store at -20 ⁰C, dessiccated. Avoid frequent thaw and freeze.

Maleimidocaproic hydrazide

Description:

Nanocs SnapLink maleimide hydrazide is a heterobifunctional crosslinker. This crosslinker contains a hydrazide group that can be reacted with carbohydrate. The maleimide group reacts with sulfhydryl groups at pH 6.5~7.5 to form stable thioether bonds.

Physical Properties:

• Appearance: Off-white/white solid;
• Purity: >95%

Storage Conditions:

• Store at -20 ⁰C, dessiccated. Avoid frequent thaw and freeze.

N-ethylmaleimide, NEM

Description:

N-ethylmaleimide (NEM) is a water soluble, thiol reactive maleimide that can be used to modify protein cysteine residues. Maleimide reacts with sulfhydryl groups at pH 6.5~7.5 to form stable thioether bonds. NEM has been used for protein Acyl-RAC assay. N-ethylmaleimide is a sulfhydryl alkylating reagent that inhibits H+-ATPase and suppresses the short circuit current (IC50 = 22 µM) in pancreatic duct cells. N-ethylmaleimide Inactivates NADP-dependent isocitrate dehydrogenase. Also a potent inhibitor of both Mg2+ and Ca2+/Mg2+-stimulated DNA fragmentation in rat liver nuclei. NEM stimulates arachidonic acid release through activation of PLA2 in endothelial cells. As a commonly used sulfhydryl alkylating reagent, NEM has been used for blocking sulfhydryl containing reagents which interfere with glucose oxidase assays. Inactivates NADP-dependent isocitrate dehydrogenase. Endonuclease inhibitor. Also a potent inhibitor of both Mg2+ and Ca2+/Mg2+-stimulated DNA fragmentation in rat liver nuclei.

Physical Properties:

• Appearance: Off-white/faint yellow solid
• Mol Wt: 125.13
• CAS No: 128-53-0
• Purity: >98%

Storage Conditions:

• Store at -20 ⁰C. 

N-ethylmaleimide, NEM

Description:

N-ethylmaleimide (NEM) is a water soluble, thiol reactive maleimide that can be used to modify protein cysteineresidues. Maleimide reacts with sulfhydryl groups at pH 6.5~7.5 to form stable thioether bonds. NEM has been used for protein Acyl-RAC assay. N-ethylmaleimide is a sulfhydryl alkylating reagent that inhibits H+-ATPase and suppresses the short circuit current (IC50 = 22 µM) in pancreatic duct cells. N-ethylmaleimide Inactivates NADP-dependent isocitrate dehydrogenase. Also a potent inhibitor of both Mg2+ and Ca2+/Mg2+-stimulated DNA fragmentation in rat liver nuclei. NEM stimulates arachidonic acid release through activation of PLA2 in endothelial cells. As a commonly used sulfhydryl alkylating reagent, NEM has been used for blocking sulfhydryl containing reagents which interfere with glucose oxidase assays. Inactivates NADP-dependent isocitrate dehydrogenase. Endonuclease inhibitor. Also a potent inhibitor of both Mg2+ and Ca2+/Mg2+-stimulated DNA fragmentation in rat liver nuclei.

Physical Properties:

• Appearance: Off-white/faint yellow solid
• Mol Wt: 125.13
• CAS No: 128-53-0
• Purity: >98%

Storage Conditions:

• Store at -20 ⁰C. 

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 75x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 75x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.

ITO Coated Glass Slides, 25x75x1.1 mm

ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated Glass Slides

ITO (Indium Tin Oxide) and FTO coated glass slides provided from Nanocs were made by coating ITO or FTO to one side of soda lime glass. These ITO and/or FTO coated glass, also called transparent conductive glass (TCO), come with different surface resistivity from 5 ohm/sq to 100 ohm/sq, with thickness from 0.5 mm to 2.2 mm. ITO and FTO coated glass has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO/FTO coated glass has excellent surface roughness around +-5 nm. Thickness of our ITO or FTO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated glass is over 85% in the visible range.

Nanocs ITO/FTO Glass Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;
• Glass thickness: 0.55 mm, 1.1 mm or 2.2 mm;
• ITO thickness: 30~600 nm depends on ITO surface resistivity:
• Optical transmission: 83% to 90%;
• ITO glass size: 1 cm to 10 cm, customer size available upon request.